ADSL2+ Modem Router User Manual
Table Of Contents
- Version 2.3
- For Installation
- For Using
- For Service
- Caution
- ARP (Address Resolution Protocol )
- DHCP (Dynamic Host Configuration Protocol)
- LAN (Local Area Network) & WAN (Wide Area Network)
- NAT (Network Address Translation) IP Address
- Private IP Address
- Public IP Address
- PVC (Permanent Virtual Circuit)
- UDP (User Datagram Protocol)
- Virtual Server
- VPI (Virtual Path Identifier) & VCI (Virtual Channel Identifier)
ADSL Router User Manual
For Windows XP
n Run the USB installation program from the CD provided in your router
package.
o An InstallShield Wizard will appear. Please wait for a moment.
p When the welcome screen appears, click Next for the next step.
q When the complete message of InstallShield Wizard appears, click Finish.
r Link your router and the PC with a USB cable.
s The system will detect the USB driver automatically.
Note: If the USB device is not detected, check the USB cable between the
PC and the device. Also make sure that the device is power on.
8