User manual

ADSL Bridge/Router User's Manual
82
Problem Troubleshooting Suggestion
Configuration Manager Program
You forgot/lost your Configuration
Manager user ID or password.
You can reset the device to the default configuration by
pressing the
Reset
button for 3 times on the back panel of
the device (using a pointed object such as a paper clip).
Then, type the default User ID and password admin/admin.
WARNING:
Resetting the device removes any custom
settings and returns all settings to their default values.
Cannot access the Configuration
Manager program from your
browser.
Use the ping utility to check whether your PC can
communicate with the RTA100+ ADSL Modem/Router’s
LAN IP address (by default 192.168.1.1). If it cannot, check
the Ethernet cabling.
Verify that you are using Internet Explorer v5.0 or later, or
Netscape Navigator v5.0 or later. Support for Javascript®
must be enabled in your browser. Support for Java® may
also be required.
Verify that the PC’s IP address is defined as being on the
same subnet as the IP address assigned to the LAN port
on the RTA100+ ADSL Modem/Router.
Changes to Configuration Manager
are not being retained.
Be sure to use the Commit function after any changes.