User manual

ADSL Bridge/Router User's Manual
76
To add a new login ID, click Add to display User Config-Add
page. Then enter your settings in fields provided.
Note that both the user ID and password are case sensitive.
2. After making changes, click
Submit
.
3. Select
Admin
>
Commit & Reboot
and click
Commit
to
save your changes to permanent storage.
! 
This option allows you to upgrade the device to new firmware.
After upgrading, your customized configuration will still exist and
not reset to the factory defaults. To perform upgrade task,
download required firmware file to your host PC and follow the
steps below:
1. Click Browse to locate the firmware file.
The name of the upgrade file must be one of the following:
TEImage.bin
TEDsl.gsz
TEAppl.gsz
Filesys.bin
TEPatch.bin
2. Click
Upload
to start upgrade. After a few seconds, a
message like the following should display (the file name
may differ):
File: TEDsl.gsz successfully saved to the flash. Please reboot
for the new image to take effect.
3. Power off the unit, wait a few seconds, and turn it on again
to activate the new software.
Note
Do not interrupt the upgrade process otherwise it might cause
damage to your router.