User manual

1
1 Introduction
Congratulations on becoming the owner of the RTA100+ ADSL
Ethernet+USB modem/router. Your LAN (local area network) will
now be able to access the Internet using your high-speed ADSL
connection.
This manual will show you how to install and set up your RTA100+
ADSL Modem/Router, and how to customize its configuration to
get the most out of your new product.


Internal ADSL modem for high-speed Internet access

10/100Base-T Ethernet router to provide Internet
connectivity to all computers on your LAN

USB port for connecting a USB-enabled PC

Network address translation (NAT) and IP filtering
functions to provide firewall protection for your
computers

Network configuration through DHCP

Configuration program you access via an HTML browser

CLI session configuration via terminal emulation
software

In addition to this document, your RTA100+ ADSL Modem/Router
should arrive with the following:
 One RTA100+ ADSL Modem/Router

One power adapter

One straight-through Ethernet cable

One standard phone/DSL line cable

One USB cable (Optional)
  
In order to use your RTA100+ ADSL Modem/Router, you must
have the following:

ADSL service up and running on your telephone line,
with at least one public Internet address for your LAN.

One or more computers each contains an Ethernet
10Base-T/100Base-T network interface card (NIC)
and/or a single computer with a USB port.

An Ethernet hub/switch, if you are connecting the device
to more than one computer.