User manual

ADSL Bridge/Router User's Manual
60
Option 2: Configuring DNS on the ADSL/Ethernet router
You can configure the DNS server address to be relayed on
the router if one of the following circumstances applies:
Not using PPP connection to the ISP (or a protocol
other than PPP is used, such as EoA).
You use PPP connection and
Use DNS
is already
enabled
. Then these configured addresses will be
used in addition to those DNS addresses learned
through PPP.
You use PPP connection and
Use DNS
is
disabled
.
Then these configured addresses will be used.
Follow these steps to configure DNS relay on the router:
(a) Go to
Service
>
DNS
to display the DNS Configuration
page.
(b) Type the IP address of the DNS server in an empty row
and click
Add
. Click the
Enable
radio button, and then
click
Submit
.
(c) Select
Admin
>
Commit & Reboot
and click
Commit
to
save your changes to permanent storage.