User manual

ADSL Bridge/Router User's Manual
52
If all LAN addresses should be translated, specify 0.0.0.0 and
255.255.255.255 respectively.
If you use non-sequential private addresses, you can create
an additional napt rule for each separate range of addresses.
7. When you have completed entering all information, click
Submit
.
A page displays to confirm the change.
8. Click
Close
to return to the NAT Configuration page.
The new rule should display in the NAT Rule table.
9. On the NAT Configuration page, ensure that the
Enable
radio button is turned on.
10. On the NAT Configuration page, click
Submit
.
A page displays to confirm your changes.
11. Select
Admin
>
Commit & Reboot
and click
Commit
to
save your changes to permanent storage.
The rdr rule: Allowing external access to a LAN computer
You can create an rdr rule to make a computer on your LAN, such
as a Web or FTP server, available to Internet users without
requiring you to obtain a public IP address for that computer. The
computer’s private IP address is translated to your public IP
address in all incoming and outgoing data packets.
Note
Without an rdr rule (or bimap rule), the RTA100+ ADSL
Modem/Router blocks attempts by external computers to access
your LAN computers.
*
Follow these instructions to add an rdr rule.