User manual

ADSL Bridge/Router User's Manual
36
2. Creating an IPoA interface.
a. Select Routing > IPoA > Add to add a new IPoA
interface.
*
b. The ATM VC interface, e.g., aal5-0 should has been
added to your lower interface.
c. Then enter the fields below:
Field Description
IPoA Interface Select an IPoA interface from the
available interfaces, e.g.,
ipoa-0
.
Conf. IP
Address
Enter the IP address given by your
ISP, e.g., 10.100.17.89.
Interface Sec
Type
Select the type of firewall
protections that are in effect on the
interface. e.g.,
Public
.
Net Mask Enter the IP address given by your
ISP, e.g.,
255.255.255.248
.
RFC1577 For RFC 1577-Classical IP and
ARP over ATM, select Yes.
For RFC 1483 Router, select
No
.
Use DHCP
Disable
Default Route
Enable
Gateway IP
Address
Enter the gateway IP address given
by your ISP, e.g.,
10.100.17.94
.
After entering the fields above, click
Submit
.
d. When confirmation page appears, click
Close
.
e. You will return to the
IPoA Configuration
table and see
the newly added IPoA entry.