User manual

ADSL Bridge/Router User's Manual
30
Part 2: Check your connection status.
The WAN Interface item should display the interface you created
to communicate with your ISP. A green ball in the Status field
indicates a successful connection.
*
Part 2: Configuring the PC.
Option 1: Your PC uses the IP given by your ISP.
If this is the case, configure your PC to use the static IP given
by your ISP, for example:
 
IP address:
10.100.16.2
Subnet mask: 255.255.255.0
Default gateway:
10.100.16.254
Note
With the configuration above, your PC should be able to access
the Internet now but will lose the local connection to the device’s
LAN port. If you want to configure the RTA100+ ADSL
Modem/Router via the Web browser again, you should
re-configure the PC to
192.168.1.x
to be in the same subnet of
the device’s LAN port.

Option 2: Your client use PPPoE software to connect to
your ISP.
Just keep your PC’s setting as a DHCP client and execute the
PPPoE software to make the connection.