User manual

Error! Style not defined.. Error! Style not defined.
29
*
3. Enable Bridging function.
a. Select
Bridging
>
Bridging
page to display the Bridge
Configuration page.
b. Select
eth-0
from the list and click
Add
. If the device’s
USB port is connected to a PC, select
usb-0
and click
Add
.
c. Select the EOA interface to be used (e.g.
eoa-0
) from the
drop-down list, and then click
Add
.
*
d. Set the Bridging item to Enable and click Submit. A
confirmation page display to confirm your changes.
4. LAN configuration.
a. Select
Bridging
>
LAN Config
.
b. Don’t modify the settings; just keep the default shown as
the figure below:
*
5. Commit your changes.
Select Admin > Commit & Reboot and click Commit to
store your changes to permanent memory.