User manual

ADSL Bridge/Router User's Manual
28
2. Creating an EoA interface.
a. Select Bridging > RFC1483 Interface (EoA) > Add to
add a new EoA interface.
*
b. Enter the provided fields as below.
Field Description
EOA Interface Select an EoA interface from
the available interfaces, e.g.,
eoa-0.
Interface Sec Type
Public
.
Lower Interface Select the ATM VC interface
you created in Step 1, e.g.,
aal5-0
.
Config. IP
Address/Netmask
0.0.0.0
/
0.0.0.0
.
To use the device as a bridge,
you don’t need to set the IP
address and subnet mask.
Just keep the default.
Use DHCP Disable
Default Route
Disable
Gateway IP Address Leave it empty. You don’t
need to set the gateway.
After entering the fields above, click
Submit
.
c. When confirmation page appears, click
Close
.
d. You will return to the
EOA
table and see the newly added
EOA entry.