User manual

27
7 Basic Configuration
The chapter provides you with the basic configurations to get your
device run and have your network connected to the Internet.
The instructions assume that the device is not predefined with any
ATM VC, PPP and IPoA settings. For each connection method,
example parameters are given for your better understanding. You
should consult with your IPS to determine your connection mode
and enter the actual values provided by your ISP.
Your device may already be preconfigured with the necessary
settings to get your network connected to the Internet. Contact
your ISP to determine whether you should change any existing
values.
' 
Part 1: Configuring the RTA100+ ADSL Modem/Router
1. Creating an ATM VC interface.
a. Select
Bridging
>
ATM VC
>
Add
. The ATM VC-Add
page displays.
b. Enter the provided fields as below.
Field Description
VC Interface Select a VC interface from the
available interfaces, e.g.,
aal5-0
.
VPI/VCI Enter the VPI/VCI values
given by your ISP,e.g.,
8/35
.
Mux Type Select
LLC
or
VC
as required
by your ISP.
Max Proto per AAL5 Keep the default 2.
After entering the fields above, click
Submit
.
c. When confirmation page appears, click
Close
.
d. You will return to the
ATM VC Configuration
table and
see the newly added ATM VC entry.