User manual

17
5 Configuration via CLI Session
Your RTA100+ ADSL Modem/Router can be connect to your PC
via the serial port and you access CLI as Telnet client. However, it
is strongly recommended that you configure your device through
Web based Configuration Manager. For more information, please
see next Chapter 5.
Before you proceed, please make sure that your terminal
emulation software is configured as below:
Bits/second 38400
Data bits 8
Party None
Stop bits 1
Flow Control None
&&!
To log in for the first time, use the default user name and
password:
Login:
admin
Password:
admin
The default user is pre-configured with root privilege level and is
allowed to modify the system configuration as need. From now on,
you may start to configure your RTA100+ ADSL Modem/Router
with CLI.