User manual

ADSL Bridge/Router User's Manual
14
Windows NT 4.0 workstations:
1. In the Windows NT task bar, click the
Start
button, point to
Settings
, and then click
Control Panel
.
2. In the Control Panel window, double click the
Network
icon.
3. In the Network dialog box, click the
Protocols
tab.
4. In the Protocols tab, select
TCP/IP
, and then click
Properties
.
5. In the Microsoft TCP/IP Properties dialog box, click the
radio button labeled
Obtain an IP address from a DHCP
server
.
6. Click
OK
twice to confirm and save your changes, and then
close the Control Panel.
Windows 2000, XP PCs:
1. In the Windows task bar, click the
Start
button, point to
Settings, and then click Control Panel.
2. Double-click the
Network and Dial-up Connections
(or
Network Connections
for Windows XP) icon.
3. Right-click the
Local Area Connection
icon, and then
select Properties.
4. Highlight
Internet Protocol (TCP/IP)
, and then click
Properties
.
Note:
If you are using USB PC, select the TCP/IP for your
USB device, for example: Dynalink USB IAD LAN Modem
.
5. In the
Internet Protocol (TCP/IP) Properties
dialog box,
click the radio button labeled Obtain an IP address
automatically
. Also click the radio button labeled
Obtain
DNS server address automatically
.
6. Click
OK
twice to confirm and save your changes, and then
close the Control Panel.
! 
In some cases, you may want to assign static IP to your PC
directly if:

In
bridge
mode, you have completed initial configuration
and you need to use the IP address and default gateway
given by your ISP.

You have obtained one or more public IP addresses that
you want to always associate with specific computers