User's Guide

DL-WRX36 Router User Guide
77
5.6.2 Basic
General > QoS > Basic
Basic setting allows configure WAN interface upload
bandwidth. Bandwidth management helps properly allocate
bandwidth resources. It has two queue type: weighted round
robin and weighted fair queuing.
1. Enable QoS.
2. Design Speed Limitation for Upstream & Downstream.
WAN Upload (LAN-to-WAN) =50Mbps
Private Network Download (WAN-to-LAN) =100Mbps
Note: Once incoming stream rate exceeds Speed Limitation
(congestion), QoS competition mechanism would be triggered
and started to follow Egress Queue algorithm (Strict Priority
or WRR or WFQ)
3. Configure Queue Type and select general “Strict Priority”
algorithm on both WAN Interface (LAN-to-WAN) & Private
Network (WAN-to-LAN).
Strict Priority: That’s, “Higher Queue streams MUST be
guaranteed to higher opportunity than lower one while
traffic congestion occurs”.