User Guide

DynalinkXDL-WRX36 | User Guide
96
7. Troubleshooting
If you are having problems with your router, try these basic steps in this section before looking for further solutions.
How to reset DL-WRX36 router to factory default settings?
A factory reset will restore all the settings to default status just like you firstly got the router. Make sure you have already backed up
the configuration before using the process of reset to default to fix other issues. Factory reset could be done via the reset button on
the back side of the router (See 3. Let’s get started for the location of each interface). Press and hold the button for 7 seconds. You
will see the power LED starts flashing blue and then lights off in a few seconds. After that, the router will reboot automatically. You
can see all the configurations become default status when the process is completed. In another way, you can also reset the router
to default via Web UI and APP. Go to System Settings > Configuration & Reset and click the Reset to Default button. The router
will automatically start the factory reset process.
What if I forgot my login password?
If you forget the login password, please refer to the product label which is located on the bottom of the router. You will see the
username, password, and other detailed information. Make sure you didn’t change the password before. And try to use the default
password to access the web UI. However, once the password has been changed, you will need to reset the router to default. Then
use the password displayed on the label to access the web UI.