Owner's manual

TABLE OF CONTENTS
1. Safety Instructions 1
2. Product Features 1
3. Specifications 2
3.1 General 2
3.2 Inputs 3
3.2.1 Analog Sensor Connection (Sign) 3
3.2.2 Digital Sensor Connection (IQ) 4
3.2.3 Sensor Supply 4
3.2.4 Binary Input 5
3.3 Outputs 5
3.3.1 Analog Output 5
3.3.2 Relay 6
3.3.3 Open Collector Output 6
3.4 Data Communication 6
3.4.1 Serial Interface (RS 232) 6
3.5 Environment 6
3.5.1 Climatic Conditions 6
4. Principle of Operation 7
4.1 General 7
4.2 Machine Factor 8
4.2.1 Displaying other Physical Values 8
5. Installation 9
6. Connections 9
6.1 Front View 9
6.2 Terminals 10
7. Hardware Configuration 11
7.1 Analog Sensor Input (Sign) 11
7.2 Digital Sensor Input (IQ) 11
8. Configuration with PC Software 12
8.1 Software Concept 12
8.2 PC Communications 12
8.3 PC Software Settings 12
8.3.1 Interface (Settings Æ Interface) 12
8.3.2 Display Interval (Settings Æ Display Interval) 12
8.4 Parameter List and Ranges 13
8.5 Parameters 14
8.5.1 System Parameters (Configuration Æ System) 14
8.5.2 Sensor Parameter (Configuration Æ Sensor) 14
8.5.3 Analog Output (Configuration Æ Analog Output) 15
8.5.4 Limit (Configuration Æ Limit) 15
8.5.5 Relay parameter and selection of Parameter set 16
9. Operating behavior 17
9.1 Power on 17
9.1.1 Analog Output 17
9.1.2 Relay Output 17
9.2 Measurement 17
9.2.1 The adaptive Trigger Level 17
9.2.2 Signal Failure 18
9.3 Functions 18
9.3.1 Limits and Window Function 18
9.3.2 Parameter Set A and B 18
9.3.3 Relay Hold function 18
9.3.4 Push-Button 18
9.3.5 Binary Input 19
9.4 Fault Behavior 19
9.4.1 Sensor Fault (Sensor Monitoring) 19
9.4.2 System alarm 19
9.4.3 Alarm 19
9.5 Power supply interruption 19
10. Mechanical Construction / Housing 20
11. Accessories 20