User manual

Installation and User Manual for the GSC400 PC Software Interface

4.3.8 – Misc

The GSC400 Misc screen allows

configuration to the following:

GSC400 Clock Settings:

1. Update time with windows time

Exercise Settings:

1. Exerciser Enable

2. Start Date

3. Start Hour

4. PreAlarm Delay

5. Run Duration

6. Repeat Freq.

Exerciser setup

Exerciser Enable Disable, enable

Run Duration 10-240 minutes

Pre-Alarm Delay 1-20 minutes

Repeat Frequency 1-672 hours

Start Hour 0-23

Start Date 1-31

The GSC400 clock settings may be set by pressing the “Update Clock with

Windows Time” button. The GSC400 Time and Date will be set as to the

Time/Date on the programming PC. The GSC400 has an internal power backup

which will power the Clock display while the controller is not powered by a DC power

source. If the controller is not power by the DC source for approx 3 weeks the controller

time will display 00:00:00. The “Update Clock with Windows Time” will need to be

initiated.