User manual

Installation and User Manual for the GSC400 PC Software Interface

4.3.2 – Analog Inputs

The GSC400 Analog Input screen allows

configuration to the following inputs:

1. Hi Engine Temp

2. Oil Pressure

3. Fuel Level

4. Oil Level

5. Fuel in Basin

6. Low Engine Temp

Options for each parameter:

Specific

Input

Input Pin Reserve, Analog 2-7*

Signal Source J1939, Switch input, Sender

Bypass Delay 0-60 Seconds

Switch Setting GND = Fail, Open = Fail

Shorted Sender Disable, Warning, Shutdown

Open Sender Disable, Warning, Shutdown

Units selectable

Warning Level Adjustable

Failure Level Adjustable

*Analog inputs 2, 5, 6 and 7 are designed for high impedance senders.

Analog inputs 3 and 4 are designed for low impedance senders.