User manual

Installation and User Manual for the GSC400 PC Software Interface
11
4.3 – GSC400 Update Interface Screen
Data transfer between the GSC400 and the PC
software interface may be achieved by clicking
the proper buttons on the bottom of the interface
screen. Data may be read from the GSC400 and
displayed within the PC interface screen or data
displayed in the PC interface screen may be
programmed to the GSC400. Storing or reading
specific data such as engine logic, inputs,
outputs, battery, speed, generator, J1939 or misc
can be obtained by using the appropriate buttons.
Storing or reading all data such as engine logic,
inputs, outputs, battery, speed, generator, J1939
and misc can be obtained by using the Store All
or Read All buttons.
1. Store engine Logic:
Writes the current engine logic settings
within the PC interface to the GSC400.
2. Read Engine Logic:
Reads the engine logic setting values which
are currently being used by the GSC400 and
displays it to the PC interface screen.
3. Store All:
Writes all current GSC400 settings
within the PC interface to the GSC400
including Engine Logic, Analog Inputs, Digital
I/O, Battery, Speed, Generator, J1939 and Misc.
4. Read All:
Reads all current GSC400 settings values
which are currently being used by the
GSC400 and displays it to the PC interface
Screen including Engine Logic, Analog Inputs,
Digital I/O, Battery, Speed, Generator, J1939
and Misc.