User manual

29 of 30
is placed in drive. DynaGen Configurator icon.
After installing
Configurator the
program will not start.
The user needs to restart the
computer
Go to the start menu,
followed by shutdown,
Restart the computer
Problem detecting
computers parallel port
during installation.
Program not automatically
detecting port address
.
Choose the port address
manually by clicking the “set
port address” features button.
See section 4.2.6
Message stating “This
is not a configuration
file”.
Chosen file was not a proper
configuration file.
Open a proper saved
configuration file
.
When reading the
GSC300 a popup
message stating “Error
Reading” appears.
The GSC300 may not be
properly connected to the PC
Make sure the GSC300 is
properly connected to the
parallel port with the supplied
cable. See section 3
.
Message stating, “Disk
is full” when saving
configuration files to
disk.
Trying to save to a CD Rom or
disk that is full.
Deleting files from the disk or
using a disk with sufficient
space.
No communication
with USB
No USB driver installed.
Not plugged in
Install drivers and restart your
machine.
Plug in USB
Messages read all
questions marks.
USB box not checked when
change messaging window
opens.
Check the USB box when
messaging window appears.
Can’t read data or
store data when using
USB
The correct read and store
buttons are not being used
Use the correct read and
store buttons
I see windows from
other programs
opening up while
reading and storing
This a background process that
happens when using the USB
adaptor
It is normal and necessary
Message stating,
“Device is not ready”
when saving
configuration files to
disk.
Trying to save to a CD Rom or
disk that is not present.
Make sure a disk is placed in
the proper drive.