User manual

27 of 30
Extra Relay If ETS is chosen the extra relay will be used as an Energize to Stop
output. If preheat is chosen the extra relay will be used as a preheat
output that will turn on for the user selected time before generator
cranking.
Fuel During
Crank Rest
If ON is choosing then the fuel output will be left on during crank rest
time.
Restart on
False Start
If this option is enabled when the engine goes into failure before the oil
bypass time has passed, the GSC300 will re-attempt to start the
generator.
Post-Heat If this option is enabled then the extra relay will turn on for 7 seconds
after the generator is up to its running speed. A mid-heat option is also
automatically combined with post-heat which will be enabled during
cranking.