Instruction Manual
❏
William’s Brothers #13300 5" [127mm]
Vintage Wheels (WBRQ1133)
❏
1/2" [13mm] double-sided foam mounting
tape (GPMQ4440)
❏
Velcro hook and loop material (for
mounting battery pack, GPMQ4480)
❏
Great Planes long-handle 3/32" hex driver
ball wrench (for wing strut screws,
GPMR8002)
❏
2 oz. [60g] Thin Pro CA (GPMR6003)
❏
2 oz. [60g] Medium Pro CA+ (GPMR6009)
❏
Pro
™
30-minute epoxy (GPMR6047)
❏
Milled fiberglass (GPMR6165) -or-
❏
Microballoons (TOPR1090)
❏
HobbyLite
™
balsa-colored balsa filler
(HCAR3401)
❏
Plan protector (GPMR6167) or wax paper
❏
Threadlocker thread locking cement
(GPMR6060)
❏
Drill bits: 1/16" [1.6mm], 3/32" [2.4mm],
1/8" [3.2mm], 9/64" [3.6mm] (or 1/8"
[3.2mm]), 5/32" [4mm], 3/16" [4.8mm],
13/64" [5.2mm], 1/4" [6.4mm], 17/64"
[6.7mm] (or 1/4" [6.4mm]), #34 (or 17/64"
[6.7mm])
❏
6-32 tap and #36 (or 17/64" 6.7mm]) drill or
Great Planes 6-32 tap and drill set
(GPMR8102)
❏
1/4-20 tap and #7 (or 13/64" [5.2mm]) drill
or Great Planes 1/4-20 tap and drill set
(GPMR8105)
❏
Tap handle (GPMR8120)
❏
Silver solder w/flux (GPMR8070)
❏
Stick-on segmented lead weights
(GPMQ4485)
❏
#1 Hobby knife (HCAR0105)
❏
#11 blades (5-pack, HCAR0211)
❏
#11 blades (100-pack, HCAR0311)
❏
T-pins (small – HCAR5100, medium –
HCAR5150, large – large HCAR5200)
❏
3/16" [4.8mm] K&S brass tube
❏
X-Acto
®
#240 razor saw (XACR1440)
❏
Sanding tools and sandpaper assortment
(see
“Easy-Touch
™
Bar Sander”
section)
❏
21st Century
®
sealing iron (COVR2700)
❏
21st Century iron cover (COVR2702)
❏
21st Century trim seal iron (COVR2750)
Here is a list of optional tools and accessories
mentioned in the manual that will help you
build the S.E.5a.
❏
16" x 36" [410 x 910mm] building board
(GPMR6948)
❏
Robart Super Stand II (ROBP1402)
❏
William’s Brother’s #625 1/4-scale
standard pilot (WBRQ2625)
❏
Acrylic paint and paint brushes for
painting pilot (found at hobby and craft
stores)
❏
William’s Brother’s #161 2" 1/6-scale Lewis
Aircraft machine gun (WBRQ3561)
❏
Fourmost Products #FOR 114 regular
cockpit coaming (FORQ2014)
❏
Masking tape (TOPR8018)
❏
CA activator (2 oz. [57g] spray –
GPMR6035, or 4 oz. [113g] aerosol –
GPMR634)
❏
CA applicator tips (HCAR3780)
❏
CA debonder (GPMR6039)
❏
Denatured alcohol (for epoxy clean up)
❏
Epoxy brushes (6, GPMR8060)
❏
Mixing sticks (50, GPMR8055)
❏
Mixing cups (GPMR8056)
❏
Slot Machine
™
hinge slotting tool (110V,
GPMR4010)
❏
Builder’s Triangle Set (HCAR0480)
❏
Curved-tip canopy scissors for trimming
plastic parts (HCAR0667)
OPTIONAL SUPPLIES
& TOOLS
COVERING TOOLS
ADHESIVES & BUILDING
SUPPLIES
6