Owner`s manual

8
STEP 4: INSTRUCTION ON ELECTRONIC LIGHTS
HOW TO USE:
1. The switches lie on the rear of the
lamp case located at the ends of the
scooter. There are two switches, one
on each side (right and left).
2. The factory default setting for the
light function is OFF.
3. Turn it on by pressing once; and turn
it off by pressing a second time.
4. Activate blinking lights by steeping
or tapping on scooter deck.
BATTERY REMOVAL AND
REPLACEMENT
1. Use a Phillips screw driver to
remove the screws which are used
to fasten the lamp box.
2. Safely remove the lamp box.
NOTE:
Be sure to turn off the power
switches before doing all of the above.
push