User Manual

15
Disconnect the handlebar connector from the control module connector before
conducting any maintenance procedures.
TOOLS REQUIRED: 17mm Socket Wrench
(included)
HOW TO REPLACE THE BATTERY
1. Unscrew the screw on the seat with a screwdriver and remove the seat.
2. Use a screwdriver to remove the two screws from the battery retainer.
3. Unplug the power connector (which is connected to the battery).
4. Remove the battery.
5. Carefully lift the old battery and replace it with a new one.
6. Replace the battery retainer and secure it with screws. Plug the power connector
into the battery connector, and replace the seat, securing it with the screw
removed in step 1.
DETAILED MAINTENANCE AND REPAIR
F
1
2
3
Phillips Screwdriver
(not included)