User Manual

12
• Use only an original charger (AC 120V 60Hz) with an output of DC 6V (0.5A) to
charge your ride-on toy battery.
• NOTE TO ADULTS: Regularly examine the charger for damage to the cord, plug,
housing or other parts that may result in the risk of fire, electric shock or injury.
• If your battery is old and will not accept a charge, do not leave it in the ride-on
toy. Always remove a dead battery from the ride-on toy.
• After the first charge, recharge the battery for at least 12 hours after each use.
Never charge the battery longer than 30 hours. Charge the battery after each
use, regardless of how long the ride-on toy was used.
• Do not allow the battery to run down completely before charging.
• Charge the battery before storing the ride-on toy.
• Charge the battery at least once per month, even if the ride-on toy has not been
used.
NOTE:
• This product has CHARGING PROTECTION: when charging, all the functions will
be cut off.
• Recharges after initial charge - Up to 12 hours, and never charge the battery
longer than 30 hours.
• When the ride-on toy begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time 12 hours, less than 30
hours at most.
WARNING: Use the charger in dry locations only.
1. Plug the charger port into the input socket (the socket is on the back of the ride-
on toy body).
2. Plug the charger plug into a wall outlet. The battery will begin charging.
NOTE: A red LED light indicates that the battery is charging and a green LED light
indicates that the battery is fully charged. (If the lights on the charger do not light
up, check the power to the outlets.)
Charging Input Socket