User Manual

8
1. UNFOLDING YOUR SCOOTER
• Loosen the locking lever to release the
locking mechanism (Figure 1).
• Pull and keep pulling the release button,
while raising the front end of the scooter to
an upright position. You can stop pulling
the release button when the front end of
the scooter is raising (Figure 2).
• Continue to raise the front end until you hear
a “click” sound. Make sure the pin locks into
the hole as shown. This means the front end
has locked into place (Figure 3).
• If locked into place correctly, the front end
should not move forward or backward.
• Close the locking lever to tighten the
locking mechanism.
Your scooter comes assembled by the manufacturer. It is important to fully unfold
and secure the scooter in an upright position before riding.
WARNING: The scooter is to be initially unfolded and adjusted by an adult.
Federal law requires the box to warn of small parts and the risks to children under three.
This scooter is NOT recommended for children under five years regardless of their size and
maturity.
WARNING: Failure to properly lock the scooter into position can result in injury to
the rider.
WARNING: Children can be harmed by small parts, sharp edges and sharp points
in the scooters unassembled state. In the unassembled state, this package contains small
parts. Adult assembly is required; children should not handle parts, or help in assembly of
the scooter.
Figure 1
Figure 2
Figure 3
pin
SETUP AND ADJUSTMENT
D