User manual

POWERMATE
3
89
7 Specifications
Property PowerMate 1000 PowerMate 1600 PowerMate 2200
Order No. F01U131113
DC-PM1000-3-UNIV
F01U131114
DC-PM1600-3-UNIV
F01U131115
DC-PM2200-3-UNIV
Channels (Mono + Stereo) 6 + 4 12 + 4 18 + 4
Auxiliarys (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
into 2.66 Ohms 2 x 1600 W
into 4 Ohms 2 x 1250 W
into 8 Ohms 2 x 675 W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
into 2.66 Ohms 2 x 1350 W
into 4 Ohms 2 x 1150 W
into 8 Ohms 2 x 650 W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
into 2.66 Ohms 2 x 1350 W
into 4 Ohms 2 x 1000 W
into 8 Ohms 2 x 600 W
Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel
into 4 Ohms 2 x 900 W
into 8 Ohms 2 x 450 W
Maximum Output Voltage, of power amplifier, 1 kHz, no load 74 V
rms
THD, at 1 kHz, MBW = 80 kHz
MIC input to Master A L/R outputs, +16 dBu, typical < 0.005%
POWER AMP INPUTS to Speaker L/R outputs < 0.075%
DIM 30, power amplifier, 3.15 kHz, 15 kHz < 0.05%
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz < 0.15%
Frequency Response, -3 dB, ref. 1 kHz
Any input to any Mixer output 15 Hz to 70 kHz
Any input to Speaker L/R output 20 Hz to 30 kHz
Crosstalk, 1 kHz
Amplifier L/R < -85 dB
Channel to Channel < -80 dB
Mute- and Standby-Switch attenuation > 100 dB
Fader and FX/AUX/MON-Send attenuation > 85 dB
CMRR, MIC input, 1 kHz > 80 dB
Input Sensitivity, all level controls in max. position
MIC -74 dBu (155 µV)
LINE (Mono) -54 dBu (1.55 mV)
LINE (Stereo) -34 dBu (15.5 mV)
CD (Stereo) -34 dBu (15.5 mV)
POWER AMP INPUTS +8 dBu (1.95 V)
Maximum Level, mixing desk
MIC inputs +21 dBu
Mono Line inputs +41 dBu
Stereo Line inputs +30 dBu
All other inputs +22 dBu
All other outputs +22 dBu
Input Impedances
MIC 2 kOhms
Insert Return 3.3 kOhms
2Track Return & CD In 10 kOhms
All other inputs > 15 kOhms
Output Impedances
Phones 47 Ohms
All other outputs 75 Ohms