User manual
Table Of Contents
- 1 Introduction
- 2 Controls, Indicators and Connections
- 2.1 Input Mono
- 2.2 Input Stereo
- 2.3 FX 1/2
- 2.4 AUX 1/2
- 2.5 MON 1/2
- 2.6 MASTER with GEQ
- 49 - MASTER LED-DISPLAY
- 50 - MUTE
- 51 - PFL
- 52 - MASTER L/R fader
- 53 - STANDBY
- 54 - MASTER A OUT L/R
- 55 - INPUTS POWER AMP L/R
- 56 - MASTER B OUTPUTS L/R
- 57 - MASTER B
- 58 - PRE/POST of MASTER B
- 59 - STEREO/MONO of MASTER B
- 60 - PHONES
- 61 - PHONES
- 62 - REC SEND L/R
- 63 - 2TRACK IN L/R
- 64 - 2TRACK to MASTER
- 65 - REC SEND & USB OUT
- 66 - LAMP 12V/5W
- 67 - 11-BAND STEREO GRAPHIC EQUALIZER
- 68 - GRAPHIC EQ to MASTER / MON 1/2
- 2.7 DISPLAY with function keys
- 2.8 Stereo Power Amplifier
- 2.9 Rear panel
- 3 Display & functions
- 4 DIGITAL AUDIO INTERFACE
- 5 Setting up a standard PA
- 6 Master Patchbay and different setup alternatives
- 1 Einführung
- 2 Bedienelemente und Anschlüsse
- 2.1 Input Mono
- 2.2 Input Stereo
- 2.3 FX 1/2
- 2.4 AUX 1/2
- 2.5 MON 1/2
- 2.6 MASTER mit GEQ
- 49 - MASTER LED-Display
- 50 - MUTE-Schalter
- 51 - PFL-Schalter
- 52 - MASTER L/R-Fader
- 53 - STANDBY-Schalter
- 54 - MASTER A OUT L/R-Buchsen
- 55 - INPUTS POWER AMP L/R-Buchsen
- 56 - MASTER B OUTPUTS L/R-Buchsen
- 57 - MASTER B-Regler
- 58 - PRE/POST-Schalter für MASTER B
- 59 - STEREO/MONO-Schalter für MASTER B
- 60 - PHONES-Buchse
- 61 - PHONES-Regler
- 62 - REC SEND L/R-Buchsen
- 63 - 2TRACK IN L/R-Buchsen
- 64 - 2TRACK to MASTER
- 65 - REC SEND & USB OUT-Regler
- 66 - LAMP 12V/5W
- 67 - 11-BAND STEREO GRAPHIC EQUALIZER
- 68 - GRAPHIC EQ to MASTER / MON 1/2
- 2.7 DISPLAY mit Funktions-Tasten
- 2.8 Stereo-Leistungsverstärker
- 2.9 Rückseite
- 73 - Netzbuchse
- Die Spannungsversorgung des PowerMate erfolgt ausschließlich mit dem mitgelieferten IEC-Netzkabel über eine verriegelnde Netzbuchse. Schließen Sie den PowerMate nur an eine geeignete Netzversorgung an, die den auf dem Typenschild angegebenen Anfor...
- 74 - Netzschalter (POWER)
- 75 - MIDI IN/OUT-Buchsen
- 76 - Speaker Outputs Right / Left
- 3 Display & Funktionen
- 4 DIGITAL AUDIO INTERFACE
- 5 Aufbau einer Standard-PA
- 6 Master Patchbay und verschiedene Aufbauversionen
- 7 Specifications
POWERMATE
3
43
6.2 Connection of an external power amplifier
If you need to connect more loudspeaker systems than the PowerMate is capable of handling directly, you have to use
an external power amplifier. Using LF-cables with XLR plugs you can patch the signal at the MASTER A OUT L/R. Using
LF-cables with phone plugs you can patch the signal at the MASTER B OUTPUTS L/R. In this configuration the signal
path to the internal power amplifier is not interrupted and the audio signal is outputted via the speaker systems con-
nected to both amplifiers.
6.3 Using the internal power amps for monitoring
In case you want to use an external power amplifier to drive your main speaker systems (see above), the internal power
amps can be used for monitoring and side fill purposes. Use short patch-cables to connect the MON 1 or MON 2 OUTPUT
to the POWER AMP INPUTS (see illustration). The monitoring signal is fed to the internal power amps, providing you
with the possibility to connect passive monitor speaker systems.
Illustration 6-2: Connection of an external power amplifier at MASTER A OUT L/R
Illustration 6-3: Using internal power amplifier for monitoring purposes