User manual
Table Of Contents
- 1 Introduction
- 2 Controls, Indicators and Connections
- 2.1 Input Mono
- 2.2 Input Stereo
- 2.3 FX 1/2
- 2.4 AUX 1/2
- 2.5 MON 1/2
- 2.6 MASTER with GEQ
- 49 - MASTER LED-DISPLAY
- 50 - MUTE
- 51 - PFL
- 52 - MASTER L/R fader
- 53 - STANDBY
- 54 - MASTER A OUT L/R
- 55 - INPUTS POWER AMP L/R
- 56 - MASTER B OUTPUTS L/R
- 57 - MASTER B
- 58 - PRE/POST of MASTER B
- 59 - STEREO/MONO of MASTER B
- 60 - PHONES
- 61 - PHONES
- 62 - REC SEND L/R
- 63 - 2TRACK IN L/R
- 64 - 2TRACK to MASTER
- 65 - REC SEND & USB OUT
- 66 - LAMP 12V/5W
- 67 - 11-BAND STEREO GRAPHIC EQUALIZER
- 68 - GRAPHIC EQ to MASTER / MON 1/2
- 2.7 DISPLAY with function keys
- 2.8 Stereo Power Amplifier
- 2.9 Rear panel
- 3 Display & functions
- 4 DIGITAL AUDIO INTERFACE
- 5 Setting up a standard PA
- 6 Master Patchbay and different setup alternatives
- 1 Einführung
- 2 Bedienelemente und Anschlüsse
- 2.1 Input Mono
- 2.2 Input Stereo
- 2.3 FX 1/2
- 2.4 AUX 1/2
- 2.5 MON 1/2
- 2.6 MASTER mit GEQ
- 49 - MASTER LED-Display
- 50 - MUTE-Schalter
- 51 - PFL-Schalter
- 52 - MASTER L/R-Fader
- 53 - STANDBY-Schalter
- 54 - MASTER A OUT L/R-Buchsen
- 55 - INPUTS POWER AMP L/R-Buchsen
- 56 - MASTER B OUTPUTS L/R-Buchsen
- 57 - MASTER B-Regler
- 58 - PRE/POST-Schalter für MASTER B
- 59 - STEREO/MONO-Schalter für MASTER B
- 60 - PHONES-Buchse
- 61 - PHONES-Regler
- 62 - REC SEND L/R-Buchsen
- 63 - 2TRACK IN L/R-Buchsen
- 64 - 2TRACK to MASTER
- 65 - REC SEND & USB OUT-Regler
- 66 - LAMP 12V/5W
- 67 - 11-BAND STEREO GRAPHIC EQUALIZER
- 68 - GRAPHIC EQ to MASTER / MON 1/2
- 2.7 DISPLAY mit Funktions-Tasten
- 2.8 Stereo-Leistungsverstärker
- 2.9 Rückseite
- 73 - Netzbuchse
- Die Spannungsversorgung des PowerMate erfolgt ausschließlich mit dem mitgelieferten IEC-Netzkabel über eine verriegelnde Netzbuchse. Schließen Sie den PowerMate nur an eine geeignete Netzversorgung an, die den auf dem Typenschild angegebenen Anfor...
- 74 - Netzschalter (POWER)
- 75 - MIDI IN/OUT-Buchsen
- 76 - Speaker Outputs Right / Left
- 3 Display & Funktionen
- 4 DIGITAL AUDIO INTERFACE
- 5 Aufbau einer Standard-PA
- 6 Master Patchbay und verschiedene Aufbauversionen
- 7 Specifications
POWERMATE
3
42
6 Master Patchbay and different setup
alternatives
The patch field within the master section is referred to as MASTER PATCHBAY. The mixer’s Line output levels are to be
found here. To provide you with a wide range of connection possibilities, the MASTER A/B OUTPUTS, MON 1/2 OUT-
PUTS, POWER AMP INPUTS and the FX/AUX SENDS can be independently connected with each other or routed to ex-
ternal devices. In the basic configuration – when no plugs are inserted into any of the POWER AMP INPUT connectors
– signals are patched internally and fed to the internal power amplifier. Once you connect a plug to the POWER AMP
INPUTS, the internal signal path is interrupted, providing you with the opportunity to include external signals. Following,
we would like to show you some typical examples of how to use the MASTER PATCHBAY.
6.1 Maximum amount of passive speakers
The PowerMate allows the maximal connection of three loudspeaker cabinets with an impedance of 8 ohms per power
amp output channel. In other words: the internal power amplifier is capable of driving a maximum of six 8 ohms speaker
systems. The following diagram shows an example of how to set up your PowerMate for operation with the maximum
amount of speakers connected.
Usual power mixer applications do not include a monitor amps rack. Thus, active monitor systems, like the DYNACORD
AM 12 for example represent a convenient alternative.
Illustration 6-1: Maximum amount of speakers in passive configuration