User manual
Table Of Contents
- 1 Introduction
- 2 Controls, Indicators and Connections
- 2.1 Input Mono
- 2.2 Input Stereo
- 2.3 FX 1/2
- 2.4 AUX 1/2
- 2.5 MON 1/2
- 2.6 MASTER with GEQ
- 49 - MASTER LED-DISPLAY
- 50 - MUTE
- 51 - PFL
- 52 - MASTER L/R fader
- 53 - STANDBY
- 54 - MASTER A OUT L/R
- 55 - INPUTS POWER AMP L/R
- 56 - MASTER B OUTPUTS L/R
- 57 - MASTER B
- 58 - PRE/POST of MASTER B
- 59 - STEREO/MONO of MASTER B
- 60 - PHONES
- 61 - PHONES
- 62 - REC SEND L/R
- 63 - 2TRACK IN L/R
- 64 - 2TRACK to MASTER
- 65 - REC SEND & USB OUT
- 66 - LAMP 12V/5W
- 67 - 11-BAND STEREO GRAPHIC EQUALIZER
- 68 - GRAPHIC EQ to MASTER / MON 1/2
- 2.7 DISPLAY with function keys
- 2.8 Stereo Power Amplifier
- 2.9 Rear panel
- 3 Display & functions
- 4 DIGITAL AUDIO INTERFACE
- 5 Setting up a standard PA
- 6 Master Patchbay and different setup alternatives
- 1 Einführung
- 2 Bedienelemente und Anschlüsse
- 2.1 Input Mono
- 2.2 Input Stereo
- 2.3 FX 1/2
- 2.4 AUX 1/2
- 2.5 MON 1/2
- 2.6 MASTER mit GEQ
- 49 - MASTER LED-Display
- 50 - MUTE-Schalter
- 51 - PFL-Schalter
- 52 - MASTER L/R-Fader
- 53 - STANDBY-Schalter
- 54 - MASTER A OUT L/R-Buchsen
- 55 - INPUTS POWER AMP L/R-Buchsen
- 56 - MASTER B OUTPUTS L/R-Buchsen
- 57 - MASTER B-Regler
- 58 - PRE/POST-Schalter für MASTER B
- 59 - STEREO/MONO-Schalter für MASTER B
- 60 - PHONES-Buchse
- 61 - PHONES-Regler
- 62 - REC SEND L/R-Buchsen
- 63 - 2TRACK IN L/R-Buchsen
- 64 - 2TRACK to MASTER
- 65 - REC SEND & USB OUT-Regler
- 66 - LAMP 12V/5W
- 67 - 11-BAND STEREO GRAPHIC EQUALIZER
- 68 - GRAPHIC EQ to MASTER / MON 1/2
- 2.7 DISPLAY mit Funktions-Tasten
- 2.8 Stereo-Leistungsverstärker
- 2.9 Rückseite
- 73 - Netzbuchse
- Die Spannungsversorgung des PowerMate erfolgt ausschließlich mit dem mitgelieferten IEC-Netzkabel über eine verriegelnde Netzbuchse. Schließen Sie den PowerMate nur an eine geeignete Netzversorgung an, die den auf dem Typenschild angegebenen Anfor...
- 74 - Netzschalter (POWER)
- 75 - MIDI IN/OUT-Buchsen
- 76 - Speaker Outputs Right / Left
- 3 Display & Funktionen
- 4 DIGITAL AUDIO INTERFACE
- 5 Aufbau einer Standard-PA
- 6 Master Patchbay und verschiedene Aufbauversionen
- 7 Specifications
POWERMATE
3
38
5 Setting up a standard PA
5.1 Overview
In the following we would like to explain how to install a
typical sound reinforcement system in passive
configuration. The necessary equipment is:
5.2 Cabling
The mains supply cord comes with the PowerMate. The
quality of all other cables lies in your responsibility. Care-
fully chosen high quality cables are the best precaution to
prevent later problems during live operation. The follow-
ing wiring alternatives are recommended to provide trou-
ble free operation of your system.
S
PEAKER CABLES
From our experience as a manufacturer of loudspeaker
systems we know that flexible cables with a rubber jacket
and a diameter of 2.5mm
2
per conductor, used in combi-
nation with Speakon plugs and sockets, are the best
choice to guarantee the optimal connection of loudspeak-
er systems. Connect the Speakon plugs according to the
corresponding diagram on the PowerMate’s rear panel.
We recommend using 4-wire cables where also the pins
•1 PowerMate1000
• 2 HI cabinets, e.g. D 12-3
• 2 LO cabinets, e.g. Sub 115
• 2 Speaker pole-stands or 2 connection rods
• 2 active stage monitor speakers, e.g. AM 12
• 2 Speakon cables, 8 meters
• 2 Speakon cables, 2 meters
•2 XLR LF cables
Illustration 5-1: Setting up a standard PA-system