User manual

CMS
3
21
3 Display & functions
The CMS includes a premium OLED display. Compared to general LC displays the OLED display is brighter, has a greater
contrast ratio and a wider viewing angle.
3.1 Effect mode
The start screen appears after switching the CMS on. Af-
ter a few seconds the default effect for FX 1 & FX 2 and
other system parameters are displayed.
Pressing the function keys below the display allows selec-
ting an effect in a quick and easy way.
3.2 Menu mode
Press the MENU/ENTER rotary encoder in effect mode to
access the menu mode. When entering the menu mode
the main menu (see illustration 3-2) is indicated.
In menu mode the MENU/ENTER rotary encoder and the
four function keys below the display are used for naviga-
tion and for selecting and editing parameters. Turn the
MENU/ENTER rotary encoder to the left or to the right to
move the cursor in the menu. Press the MENU/ENTER ro-
tary encoder to select or execute the highlighted menu
item. If a menu entry was highlighted, the corresponding
dialog is opened. If a parameter was highlighted, the val-
ue is shown in inverse font and can be edited by turning
the MENU/ENTER rotary encoder. Press the MENU/EN-
TER rotary encoder again to apply the edited parameter
value. The bottom line of the display indicates the func-
tion for the four function keys. The following table de-
scribes some of the functions avialable in menu dialogs.
Illustration 3-1: Effect mode
BRIGHT HALL MONO DELAY
PLAY 11-12 MIDI PEAK AUX
5 55
Large Hall 3 230 ms 40%
FX1 FX2
12
3
4
5
6
789101112
13
14
15
Number Description
1 Play 11-12 indicator
2 MIDI indicator
3 PEAK indicator
4 Effect group of effect unit FX 2
5 Effect number of effect unit FX 2
6 Effect description of effect unit FX 2
7 Increases the effect number of effect unit FX 2 by one
8 Description of function key
9 Decreases the effect number of effect unit FX 2 by one
10 Increases the effect number of effect unit FX 1 by one
11 Description of function key
12 Decreases the effect number of effect unit FX 1 by one
13 Effect description of effect unit FX 1
14 Effect number of effect unit FX 1
15 Effect group of effect unit FX 1
Illustration 3-2: Access the menu mode by pressing the MENU/
ENTER rotary encoder
Illustration 3-3: Main menu in menu mode
Edit FX 2
Main Menu
AUX Mode
FX Control Setup
Edit FX 1
BACK ESC
Table 3-4: Functions of the function keys
Function Description
BACK Returns to the next higher menu level.
ESC Discards all edits in the dialog and returns to effect mode.
 or 
Move the cursor to the left or to the right.
SAVE Opens the FX User Presets list to store the edited effect as an
user preset.
OK Confirms the entry, e. g. when editing the name of an user pre-
set.