User manual

CMS
3
20
Menu mode
Press the MENU/ENTER rotary encoder in effect mode to enter the menu mode. In menu mode the display indicates the
function being executed for each function key.
53 - MENU/ENTER
Use the MENU/ENTER rotary encoder in menu mode for menu navigation. In effect mode the MENU/ENTER rotary en-
coder has no function.
54 - TAP
If a delay effect is used the delay time can be adjusted to the beat by pressing the TAP button multiple times. The yellow
LED indicates the delay time set. The function of this button can be configured using the TAP Button Ctrl. parameter,
please refer to the section “FX Control Setup” on page 23 for details.
2.8 Rear panel
55 - MAINS CONNECTOR
The CMS receives its power supply via the lockable Mains input. Only the provided power cord may be used. Connect
the CMS only to a mains network, which corresponds to the requirements indicated on the type plate.
HINT: Press the yellow button at the plug to disconnect the power cord.
56 - POWER
Mains switch to turn the CMS on or off. The CMS is operational when the display indicates the selected program num-
bers. Please make sure to set the master faders to their minimum position or engage the STANDBY switch before switch-
ing the power on. This will save you, your audience, and the equipment from unnecessary stress. In case additional
external equipment is connected to the CMS – e.g. power amps, FX units, EQs, etc. – please, proceed in the following
order when switching your equipment on:
1. switch on the FX units
2. switch on the CMS
3. switch on external power amps
When switching the power off, please proceed in the opposite order.
57 - MIDI IN/OUT
The MIDI IN/OUT ports allow connecting MIDI devices to the CMS. Next to the PC MIDI interface controlling the effect
unit is possible via MIDI IN, please see page 23 for details.
55 56 57
PO W ER
ON
MIDI IN MIDI OUT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RISQUÉ DE CHOC ELECTRIQUE - NE PAS OUVRIR
AVIS:
DESI GN ED AN D EN GI N EERED IN GERM AN Y.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCL UDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003. CET APPAREIL NUMÉRIQUE
DE LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.