User Manual

7
Bosch Security Systems, Inc. • 12000 Portland Ave South • Burnsville, MN 55337, USA • Phone: [phone] • Fax: [phone]
Subject to change without prior notice.
POWERMATE
3
/CMS
3
•Double click on a Bus Name to match the bus names in Cubase and on the PowerMate. Change the name of
bus „Stereo 1“ to „MAS L/R“, of bus „Mono 1“ to „AUX 1“ and of bus „Mono 2“ to „AUX 2“.
•Create a new preset including the input configuration by pressing the „+“ icon. The „Type In Preset Name“
dialog appears. Enter the preset name „Live“ in the text field and close the dialog by clicking the „OK“ button.
3. Creating the preset for the studio mode
HINT: Studio mode is available for PowerMate/CMS 1000
3
, 1600
3
and 2200
3
only.
1. Adding inputs
•Open the „Inputs“ tab in the „VST Connections“ dialog.
•If there is already a bus in the „Bus Name“ column listed, open the context menu (for Mac: ctrl + click) of the
bus and select the entry „Remove Bus“. Repeat for all busses.
•Select the entry „4 x Mono“ from the „Presets“ Dropdown menu. Four mono busses „Mono 1“, „Mono 2“, „Mono
3“ and „Mono 4“ are added.
Illustration 14: Renaming of inputs for the Live Preset
Illustration 15: Remove Bus
Illustration 16: Preset „4 x Mono“