User Manual

12
Bosch Security Systems, Inc. • 12000 Portland Ave South • Burnsville, MN 55337, USA • Phone: [phone] • Fax: [phone]
Subject to change without prior notice.
POWERMATE
3
/CMS
3
•„Cubase_LE/Presets/PowerMate_1000-3_1600-3_2200-3“
•„Cubase_LE/Presets/PowerMate_600-3“
•„Cubase_LE/Presets/CMS_1000-3_1600-3_2200-3“
•„Cubase_LE/Presets/CMS_600-3“
4. Copy the entire folder contents into the folder „Project Templates“.
5. Start Cubase on the Mac.
6. Create a new project and select the PM3/CMS3 template.
1. Template overview for PowerMate/CMS 1000
3
, 1600
3
, 2200
3
PM
3
/CMS
3
- STEREO
This template allows for easy stereo recording and stereo playback of the device master signal. Please note that
„USB Record Routing“ of the device must be set to „Live“. The "REC SEND & USB OUT" control is used for gain
control. For playback of the audio signal the „USB 1-2“ input of the device is used.
PM
3
/CMS
3
- LIVE
This template allows for easy recording of one stereo and two mono signals for PowerMate/CMS 1000
3
, 1600
3
,
2200
3
. Please note that „USB Record Routing“ of the device must be set to „Live“. The "REC SEND & USB OUT"
control is used for gain control of the stereo signal. The „AUX 1“- and „AUX 2“-faders are used for gain control of
the mono signals. For playback of the audio signal the „USB 1-2“ input of the PowerMate is used.
PM
3
/CMS
3
- STUDIO
This template allows for easy recording of four mono signals for PM/CMS 1000, 1600 und 2200. Please note that
„USB Record Routing“ on your PowerMate must be set to „Studio“. The „AUX 1“-, „AUX 2“, „MON 1“- and
„MON 2“-faders are used for gain control of the mono signals. For playback of the audio signal the „USB 1-2“
input of the device is used.
PM
3
/CMS
3
- MIDI
This template serves as a demonstration for the use of virtual instruments. Connect your master keyboard to the
MIDI IN jack of the device. The computer-generated sounds are transmitted back to the device over the „USB 1-
2“ input.
PM
3
/CMS
3
- EFFECT
This template serves as a demonstration for the use of virtual effect units. Here, two additional effect units are
generated in Cubase, which can be used independently of the integrated effect units of the device.
The „AUX1“- and „AUX2“-faders are used as send control of the virtual effect units. For playback of the first effect
unit the "USB 1-2" input of the device is used. For playback of the second effect unit the "USB 3-4" input of the
device is used.
2. Template overview for PowerMate/CMS 600
3
PM 600
3
/ CMS 600
3
- STEREO
This template allows for easy stereo recording and stereo playback of the PowerMate / CMS master signal. The
"REC SEND & USB OUT" control is used for gain control. For playback of the audio signal the „USB 1-2“ input of
the PowerMate is used.
PM 600
3
/ CMS 600
3
- ALL CHANNELS
This template allows the recording and playback of two mono and one stereo track.
The "AUX" and "MON" faders and the "REC SEND OUT & USB" control are used for gain control. The recording is
send back via the "USB 1-2" and "USB 3-4" input of the device.
PM 600
3
/ CMS 600
3
- MIDI
This template serves as a demonstration for the use of virtual instruments. Connect your master-/midi- keyboard
to the MIDI IN jack of the device. The computer-generated sounds are transmitted back to the PowerMate over
the „USB 1-2“ input.