User Manual

Functions
This section describes the functions (factory presets) of the AXM 12A that you can select in
the menu.
Preset
number
Name Description
F1 Monitor 1 Intended for use as a floor monitor with a flat frequency response.
F2 Monitor 2 Intended for use as a floor monitor in a very noisy environment.
Certain frequencies are enhanced to help the vocals or other lead
instruments to cut through the mix.
F3 Monitor 3 Intended for use in a dual/twin setup. If you use two AXM 12A in
front of you, acoustical coupling effects lead to a nonlinear
frequency response. These coupling effects are compensated by
this preset.
F4 GuitarCab Intended for use as a guitar monitor. With a built in speaker
simulation which emulates a 4 x 12-inch cabinet, you can connect
your guitar amp/multi effects processor directly to the AXM 12A.
F5 MAIN PA Select this function if the AXM 12A is used as a full-range PA
speaker.
F6 TOP + SUB Activates a high-pass filter when the AXM 12A is used as PA
speaker together with a powered subwoofer.
6.2.3
14 en | Configuration AXM 12A
18-Mar-14 | 02 | F01U290507 User manual Bosch Sicherheitssysteme GmbH