User Manual

Menu item Default Range Description

MIX OUT L+R L+R, R This menu item is used to select which

signal of INPUT 3 AUX IN should be output

at MIX OUT and which signal should be

delivered by the loudspeaker.

• L+R: The left and right signals of INPUT

3 are summed. The sum is output at

MIX OUT and is delivered by the

loudspeaker.

• R: Only the right signal of INPUT 3 is

output at MIX OUT. The loudspeaker

will deliver only the left signal.

Please refer to section System examples,

page 26 for different MIX OUT applications.

Delay

Off Off, 0.1–100.0

This menu item is used to delay the output

signal, e.g. to compensate for differences in

distance among individual loudspeakers.

Dim Time 30 sec 10–60 seconds This menu item is used to configure the

LCD screen to dim after a certain time of

inactivity. To exit dimmed mode, the

encoder has to be pressed.

Dim Bright 50% 0–100% This menu item is used to set the

brightness of the LCD screen in dimmed

mode.

Contrast 0 -10 – +10 This menu item is used to increase or

decrease the visibility of the LCD screen.

Load Settings F1-F6, U1–U5 Allows loading one of 6 factory or 5 user

settings.

Save Settings U1–U5 Five user memories are available to save the

current settings. A name can be assigned to

each user setting.

Factory Reset - - This menu item is used to revert the

loudspeaker to the original factory default

settings. All user settings will be deleted.

Info - - This menu item provides information about

the system model and the firmware version.

Exit - - This menu item is used to return to the

home screen.

Table 6.1: LCD menu

AXM 12A

Configuration | en 13

Bosch Sicherheitssysteme GmbH User manual 18-Mar-14 | 02 | F01U290507