User`s manual

DVR User’s Manual
33
3.6.7 E-mail Management
Users can setup three sets of e-mails for receiving event/alarm notices.
Follow the brief steps below to setup the e-mail management setting.
NOTE: In order to successfully send a notification e-mail, be sure that
the DVR is connecting to the internet.
E-mail Management
E-mail Select
E-mail Activate
E-mail Address
E-mail Video Attachment
E-mail Video Attachment Size
Event/Alarm Selection
SMTP Server Setup
1
Off
Off
100 KB
 First, select a number next to <E-mail Select>.
 Set <E-mail Activate> to <On>.
 Input the target e-mail address.
 Select whether or not to attach video clips with the e-mail.
 If <E-mail Video Attachment> is <On>, set <E-mail Video Attachment
Size> according to users’ needs. The maximum size is 500 KB.
 Enter the <Event/Alarm Selection> menu to select if the DVR should send
e-mails regarding the listed events and alarms.
 If users are going to send e-mails via an SMTP server, enter the <SMTP
Server Setup> menu to edit the related settings.
Users can select a different number for <E-mail Select> and follow the same
steps above to add a new set of e-mail to receive events and alarm
notifications. For more details about e-mail management setting, please refer
to OSD Setup Manual.
NOTE: If a notification e-mail cannot be sent, the DVR will retry
sending the e-mail automatically. It will stop the attempt after 5
minutes if the e-mail still cannot be sent.