System information

OSD Setup Manual
57
AUX Setup
The AUX setup menu is for users to configure the settings of UPS. The AUX setup menu is
displayed as below
AUX
UPS Setup
< UPS Setup >
When users wish to connect the DVR to the power source via a UPS device, the required
connections are illustrated as the following figure. The USB cable is for data communication
between the DVR and the UPS device.
Power Cable
USB Cable
UPS Device
Power Cable
The UPS Setup menu is as the following.
UPS Setup
UPS Protocol
Power Failure Scenario
UPS Shutdown Setting
UPS Info
None
None
 UPS Protocol
This item is for users to select an appropriate UPS protocol. Note that if the
UPS protocol is set to <None>, <UPS Info> will be grayed out and not
available for setup.
 Power Failure Scenario
For this item, users can choose what action the DVR should take when power
failure occurs. If <Shutdown> is selected, users have to do further setting
under <UPS Shutdown Setting>. Otherwise, select <None>, and the power of
the DVR will be cut off when electricity of the UPS device totally runs out.