User`s manual

User’s Manual
38
• ON
Select the item to remove the IR cut filter.
K Model:
• AUTO
The Internal circuit will automatically decide the occasion to remove the IR cut
filter according to the image brightness level.
THRESHOLD
The dome will remove the filter immediately when the threshold value is reached.
The threshold options are <LOW>, <MID> and <HI>. <LOW> threshold indicates
a higher sensitivity and can improve the reliability of lens.
IR COLOR
When IR function is enabled, the video output can be programmed as color or
B/W.
• ON
Select the item to remove the IR cut filter.
3.3.18 ALARM DETECT (E/F/U Model Only)
This function instructs the camera to detect movement within the monitoring area
and then send an alarm signal automatically. To activate this function, alarm
connection setups must be completed in advance.
• DETECT SWITCH
The item is used to enable or disable the ALARM DETECTION function.
• DETECT MODE
Four alarm detect modes are provided for different application.
ALARM DETECT
DETECT SWITCH OFF
DETECT MODE
INT. FOCU
S
EXIT YES
IR FUNCTION
THRESHOLD LOW
IR COLOR COLOR
EXIT YES