User`s manual

User’s Manual
33
• SELECT MODE
Select one of the modes that the dome should execute when HOME function is
enabled and the RETURN TIME is up. The options are <AUTOPAN>,
<SEQUENCE>, <CRUISE> and <PRESET>. Use the left/right direction keys of
the control keyboard to change the setting, and the bellowing items will change in
cooperating with your selection.
• PRESET
Select a preset point where the dome should go after the Return Time function,
which will be mentioned latter, is activated.
SEQUENCE
Select a sequence line that the dome camera should execute after the Return
Time function is activated. The Sequence line should be defined prior in
SEQUENCE setup menu.
AUTOPAN
Select an auto-pan line that the dome camera should execute after the Return
Time function is activated. The Auto-pan line can be defined in AUTOPAN setup
menu.
CRUISE
Select a cruise line that the dome camera should execute after the Return Time
function is activated. The Cruise line can be defined in CRUISE setup menu.
• RETURN TIME
The dome starts to count down RETURN TIME when the dome idles, and will
execute the SELECT MODE function if the return time is up. The RETURN TIME
ranges from 1 to 128 minutes.
• GO
If HOME function is enabled, the users are allowed to execute HOME function
manually by selecting this item.
• EXIT
Exit the HOME SETTING menu.
3.3.14 SEQUENCE
The function executes pre-positioning of the pan, tilt, zoom and focus features in a
certain sequence for a camera. Before set up this function, users must setup at least
two preset points.