User`s manual

User’s Manual

• ALARM PIN

The dome provides 8 alarm inputs and 1 output (1× N.O. and 1× N.C.). Select an

alarm connector which you want to set its alarm-related parameters with this item,

and then set its alarm-related parameters in Alarm Setting menu. For alarm pin

definitions, please refer to section 2.7 Alarm Pin Definition

or the installation

guide.

• ALARM SWITCH

The item is used to enable or disable the selected alarm pin function. Use the

left/right direction keys on the control keyboard to change the setting.

• ALARM TYPE

There are two kinds of alarm types: Normal Open and Normal Close, which are

illustrated as below. Select an alarm type that corresponds with the alarm

application.

• ALARM ACTION

Select one of these modes that choose a kind of actions that should be executed

when an alarm is triggered. The alarm actions can be set to execute the preset

position, sequence, auto-pan or cruise function. Use the right direction key of the

control keyboard to change the setting, and the bellowing items will change in

cooperating with your selection.

• PRESET

Select a preset point where the dome should go when an alarm pin is triggered.

The Preset points can be set by a control keyboard.

ALARM SETTING

ALARM PIN 1

ALARM SWITCH OFF

ALARM TYPE N.C.

ALARM ACTION PRESE

PRESET POINT 001

DWELL TIME ALWAY

EXIT YES