User`s manual

DVR User’s Manual
49
4.4.1.4 Erase Disc
This function is used to remove data found on a DVD+RW disk prior to
exporting new information to the drive. Select <Yes> and press ENTER to
start deleting data.
4.4.2 Quick Video Export through Front Panel
Through front panel control, the DVR allows users to easily export wanted
video as *.drv file with the built-in DVD+RW or to an external device, such as
a USB ThumbDrive
®
. To export video to an external device, make sure the
device is connected to the DVR.
NOTE: Once an external device has been connected to the DVR, the
device has priority over the built-in DVD+RW. That means the video
will be exported to the external device instead of the built-in DVD+RW.
Depending on the size of video, the exporting process may take about 10
minutes to 1 hour.
4.4.2.1 ezBurn Introduction
Built with the ezBurn technology, ezBurn function provides users the easier
way to export desired video with built-in DVD+RW or to an external device,
such as an USB ThumbDrive
®
.
TWO keys (SEARCH and COPY) and THREE touches are all what’s needed
for completing the export. The entire exporting process will be done through
the front panel, without needing to enter the OSD setup menu.
The ezBurn exporting process is illustrated as below figure:
The entire process is described step by step in the following sections.
NOTE: The file exported using ezBurn will be in .drv file format, which
can only be played using the remote player software.