Setup guide

ManualsBrandsDynaColor ManualsDigital Video Recorders (DVR)Lite H.264 DVR

000AL6X1WE00 1

Lite H.264 DVR

Setup Guide

Package Content

Inspect the packaging carton. Make sure the Lite H.264 DVR is properly delivered. Remove all

items from the box and make sure the box contains the following items.

Lite H.264 DVR SATA Cable

Power

Adaptor

Power Cord

User

’

Manual

Front Panel

1 Channels

1. In Live and Playback modes, press any key to view the corresponding

video in full-screen.

2. In input interface, the keys can be used for direct input of numbers.

3. In Dome Camera Control mode, press 1 to enter the Set/ Go preset

menu.

2 Power LED

It lights up when power source is connected.

3 Record LED

It blinks when videos are being recorded.

4 Alarm LED

It lights up when an alarm is triggered.

5 Network LED

It lights up when network is connected. In addition, it blinks when data is

being transmitted via the network.

6 DOME

Press this key to enter Dome Camera Control mode.

7 MODE

Press this key to view in full-screen or multiple window modes.

8 USB 2.0 Port

The USB 2.0 port allows users to connect an external USB device to the

unit, such as a USB ThumbDrive or a USB mouse.

9 SEQ

Press this key to start automatic sequence display of cameras.

Press this key to enter the OSD setup menu.

ESC

Press this key to cancel or exit from certain control mode.

Summary of content (10 pages)

PAGE 1
Lite H.264 DVR Setup Guide Package Content Inspect the packaging carton. Make sure the Lite H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following items. Lite H.264 DVR SATA Cable Power Adaptor Power Cord User’s Manual Front Panel 1 Channels 2 Power LED 1. In Live and Playback modes, press any key to view the corresponding video in full-screen. 2. In input interface, the keys can be used for direct input of numbers. 3.
PAGE 2
12 ENTER 13 COPY 1. In OSD menu or selection interface, press these key to make the selection or save settings. 2. In live full-screen viewing mode, press this key to view a 2× zoom image; press it again to return. This key is used for marking time in quick video export function. 14 PLAY/STOP Press once to start the playback of recorded video. Press again to exit. 15 FREEZE Press this key to freeze the current viewing screen.
PAGE 3
Pin Definition of Alarm I/O & RS-485, and Audio In: Pin 1 2 3 4 5 6 7 Definition Alarm Out Open Alarm Out COM RS485 D+ Alarm In 1 Alarm In 3 Reserved Reserved Pin 8 9 10 11 12 13 14 Definition Audio In 1 Audio In 3 Reserved Reserved GND GND Alarm Out Close Pin 15 16 17 18 19 20 21 Definition RS485 D− Alarm In 2 Alarm In 4 Reserved Reserved Audio In 2 Audio In 4 Pin 22 23 24 25 Definition Reserved Reserved GND GND Power On the DVR Please follow the proper power on procedures to avoid damaging the DVR
PAGE 4
Network Setup Configure the LAN setup for the DVR to properly function with Ethernet connection.  From OSD main menu, select  , set the item to or according to the network application, and enter .  For DHCP user, set the DHCP to . The IP address, Netmask, Gateway and DNS settings are retrieved from network servers. DHCP is dynamic that the settings change from time to time.  For Non-DHCP user, set the DHCP to .
PAGE 5
Control Buttons in Dome Camera Control Mode: 1 2 3 4 Set / Go Preset Enter Dome Camera Control Mode Iris Open Focus Near 5 Zoom In 9 Focus Far 6 ESC 10 Zoom Out 7 8 Enter / Auto Iris Close 11 Pan / Tilt 5
PAGE 6
Basic Playback Operation Search by Time:  Press SEARCH to enter the Search menu.  Move the cursor to “From” and press ENTER will start playing recorded video from the specified “From” time.  Move the cursor to “End” and press ENTER will start playing recorded video from the specified “End” time.  Move the cursor to “Select” and press LEFT/RIGHT to choose date/ time. Press ENTER and adjust the values by UP/DOWN keys. Press ENTER again to confirm or press ESC to abort.
PAGE 7
DVR Status Bar Icons Icons that will be displayed in the status bar are listed in the following table with their descriptions.
PAGE 8
Connect the DVR via the Remote Software Setup Requirements:  Make sure the PC is connected to the Internet.  Obtain IP address of the Lite H.264 DVR. To check the DVR’s IP address, press MENU on the front panel and select    to check the IP. Changing Internet Setting:  Start the IE; select from the main menu of the browser, then and then click the tab.
PAGE 9
The following picture shows the display window of the DVRRemote: Refer to the table below for brief description of functional items: Item 1 2 3 4 5 6 7 8 9 Description Instant Recording Deflicker On/Off at Playback Smoothen the Image Audio On/Off Select Camera Display Mode View Live Camera Playback Video Setup Menu Item 10 11 12 13 14 15 16 17 Description Search Event List Capture Snapshot 4:3 Viewing Aspect HDD Status Playback Control Select Picture Size Bandwidth Download DVRPlayer For more informati
PAGE 10
DVRRemote Playback Playback Remote Video:  Click on the main window toolbar, and then tab.  The and on top of the screen display the date and time from which recorded video is available for playback.  Choose in