Lite H.264 DVR User’s Manual Version 2.
DVR User’s Manual 1
DVR User’s Manual Caution and Preventive Tips • Handle with care, do not drop the unit • Mount the unit in an equipment rack or place it on a solid, stable surface • Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site • Do not place it in an area with poor ventilation or in an area close to fire or other sources of heat.
DVR User’s Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance.
DVR User’s Manual Table of Content 1. Overview .......................................................................................................................7 2. System Setup................................................................................................................8 2.1 Position the DVR .................................................................................................8 2.2 Connect Devices to the DVR ...............................................................
DVR User’s Manual 3.6.6 3.6.7 3.6.8 3.6.5.5 Alert Interval ..........................................................................29 Event Full Screen .................................................................................29 Event Duration......................................................................................30 Per Channel Config ..............................................................................30 3.6.8.1 Channel Select...............................................
DVR User’s Manual 4.6 4.5.6 Preset Points ........................................................................................48 4.5.7 Run Dome Camera Tour.......................................................................49 System Log Exportation.....................................................................................49 5. Remote Monitoring Software.....................................................................................50 5.1 Remote Monitoring System Requirements .......
DVR User’s Manual 1. Overview Lite H.264 DVR is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security solution. Its outstanding quadplex operation enables users to view live video, search and playback any recorded video by date/time or event, and remotely monitor the unit via internet on PC, MEANWHILE the recording of the DVR unit is ongoing simultaneously. Lite H.264 DVR provides the latest H.
DVR User’s Manual 2. System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit. In order to prevent the unit from data loss and system damage that caused by a sudden power fluctuation, use of an Uninterruptible Power Supply (UPS) is highly recommended 2.1 Position the DVR First, note to position / mount the DVR in a proper place and be sure to power off the unit before making any connections.
DVR User’s Manual 2.3 Rear Panel Connections There are various connectors on the rear panel for the DVR installations. The following shows the detailed description of each connector. Main Monitor (BNC/ VGA/ Digital Output) The DVR supports three different types of main monitor: BNC, VGA, or Digital Output. The main monitor displays live image and playback recorded video in full-screen or split-window format. Digital Output connector is optional.
DVR User’s Manual Audio In/Out (16CH models only) 16CH models provide audio in/out connection via a D-Sub connector. Users can connect audio source devices for each channel and audio output devices for Main/Call monitors. Refer to Setup Guide for detailed pin definitions for different models. Alarm I/O, RS-485 & Audio In A D-Sub connector is provided to offer users the flexibility to connect the DVR to Alarm I/O, RS-485 and Audio In devices.
DVR User’s Manual 3. General System Setup Before operating the DVR, some general configuration should be setup first. The following subsections will introduce function keys on the front panel and general configuration of the DVR. The regular displayed OSD information and its displayed positions are shown as following figure. Title of the channel will be displayed on the top-left corner of the window, either in full screen mode or in multiple channel mode.
DVR User’s Manual 3.1.2 Function Keys This section describes the functional keys on the front panel of the DVR. Refer to the Setup Guide for the graphical illustration of functional keys. Power Key When the quick shutdown function is enabled, press and hold this key to quick shutdown the DVR. Refer to section Power Up / Shutdown the DVR for more information about the setting of quick shutdown function.
DVR User’s Manual PLAY/STOP Press this key to switch between live image and playback video. NOTE: According to record setting, part of the latest video cannot be played back because the video is still saved in the buffer. FREEZE • Press FREEZE while viewing live image, the live video will be frozen. The date / time information shown on the monitor will continue updating. Press FREEZE again to return to live mode. • Press FREEZE while playing the recorded video, the playback video will be paused.
DVR User’s Manual 3.2 Enter OSD Setup Menu The configuration of the DVR can be customized by entering the intuitive Graphical User Interface (GUI) OSD setup menu. Collaborating with a USB mouse, setting up the DVR can be easy as operating on a PC. Press MENU and select an account to login. The next step is to enter a corresponding password. The preset password for the administrator account “admin” is “1234”.
DVR User’s Manual Account Setup Setup customized account, password, and privilege level in this menu. The account is case sensitive. The privilege level rank from levels 1~8, which level 8 has the highest privilege. Alternatively, select to stop using the account. NOTE: The username and authority level of the preset “admin” account cannot be changed. Authority Setup Setup the allowed authority level for accessing the functions listed in this menu.
DVR User’s Manual Restart / Shutdown the Unit Press MENU and input the username and password that has sufficient authority to access the OSD setup menu. Select in Main Menu and press ENTER to enter the Shutdown menu, which displays as follows. Shutdown Power Off Reboot Power Key Privilege Auth Select this item to shut down the unit. Do not remove the power during shut down until the message “You can safely turn off DVR now!” displays. Select this item to reboot the unit.
DVR User’s Manual 3.3.1 HDD Auto Scan When the DVR is powering on, HDD auto scan will be initiated if there was previously an unusual power loss or file system error. If by any chance auto scan failed, the HDD will need to be formatted. NOTE: If users wish to disable the auto scan function, enter the OSD setup menu via an authorized account and access to set to . Read the following troubleshooting to finish the auto scanning process.
DVR User’s Manual 3.4 System Date / Time Setting Users can set the current date, time and other OSD parameters in Date/Time menu (under System Setup menu). The login account should have authority to access the System Setup menu. In OSD setup menu, select and press ENTER, then select to access the Date/Time menu; the menu displays as follows.
DVR User’s Manual Date Display Mode This function allows users to set the OSD display type of the date. There are three options to select from: , or . “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”. Move to the item and press ENTER, the option starts blinking. Use UP / DOWN keys to change the setting. Time Display Mode Users can set the time format to <12 HR> or <24 HR>. Use the UP / DOWN keys to change the format. 3.4.
DVR User’s Manual 3.4.3 Network Time Protocol Setup Time Zone Select
DVR User’s Manual 3.5 Record Schedule / Quality Setting The Record Setup menu allows users to set recording quality, recording schedules, and other recording parameters. Login with a proper account to access Record Setup menu. In the Main menu, move the cursor to and press ENTER; the following menu is displayed. Record Setup Record Mode Setup Schedule Setup Preset Config Per Camera Config ezRecord Setup Data Lifetime Setup Circular Recording Audio Recording Purge Data 3.5.
DVR User’s Manual NOTE: Since a VBR file does not have a fixed size, the HDD space usage cannot be calculated and thus ezRecord function is not supported for VBR mode. Therefore, if ezRecord is selected as the preset record configuration, the option of this menu item will automatically be set as . 3.5.2 Schedule Setup The Schedule Setup is used to set the day and night time, or weekend recording schedule.
DVR User’s Manual 3.5.4 Per Camera Configuration This function is used to set the Day / Night / Weekend PPS (Picture per Second) and Quality for each channel. The Preset Configuration must be set to for accessing these schedules. The menu is displayed as below (Record Mode: 720*240@240PPS in NTSC / 720*288@200PPS in PAL).
DVR User’s Manual 3.5.6 ezRecord Setup This item aims to ease the complicated record settings, and to make the setup much easier. Note that the item can be reached only when is selected as the option for .
DVR User’s Manual 3.5.7 Data Lifetime Setup Data Lifetime indicates the duration that a video is saved and recallable in the HDD. Only those video recorded within Data Lifetime can be displayed on the screen and played back. The video exceeded Data Lifetime will be hidden and cannot be retrieved for playback.
DVR User’s Manual 3.5.8 Circular Recording Users can choose to record video in circular mode or in linear mode. If circular mode is selected, the DVR will stores new video into the HDD spaces while overwrite the oldest recorded video. Alternatively, if linear mode is selected, the DVR will stop recording when the HDD is full. The percentage of HDD usage will be displayed at the status bar. Moreover, an “ALMOST FULL” icon will show up at the status bar when HDD usage reached 98%.
DVR User’s Manual Purge Event Before The item is used to delete event video before a specific date. Use LEFT / RIGHT keys to move the cursor to next or previous field, ENTER to select the item and UP / DOWN to adjust the value. Start To Purge After the video or data to be deleted are selected, set this item to to start the deletion or choose to cancel. 3.6 Event Setting This menu allows users to determine the DVR’s behavior in response to alarm events.
DVR User’s Manual 3.6.3 Email Notice The item enables (On) / disables (Off) the Email notification of an event. When an alarm event is triggered and is enabled, an email regarding the alarm event will be sent. NOTE: In order to send an event notification email successfully, ensure that the DVR is connecting to the internet. 3.6.4 Email Attachment The function allows the DVR to send out a brief AVI video regarding the event.
DVR User’s Manual 3.6.5.1 Alert Configuration Set provides 3 combinations of Alert Notification, IP, Port, and Interval. 3.6.5.2 Alert Notification 4 options are included in this item: , , , and . : The Alert Notification is turned off. : When the alarm is triggered, the DVR will send an alert message to the CMS.
DVR User’s Manual 3.6.7 Event Duration This item determines the duration of the buzzer and Alarm Out relay function after an alarm is triggered. The available event duration range is from 5 second to 999 seconds. 3.6.8 Per Channel Config This menu is used to configure the
DVR User’s Manual 3.6.8.4 Detection Configuration If motion detection function is enabled, it is required to define the motion detection parameters such as detection area and sensitivity settings. Select a channel for setting the parameters, move the cursor to and press ENTER. The Detection Configuration menu displays as follows.
DVR User’s Manual Block Threshold indicates the motion alarm triggered level; select from <1> to <16>. Selecting <1> means the DVR will trigger the alarm when one grid is detected; and selecting <16> means the DVR will trigger the alarm when 16 grids are detected. Move the cursor to and press ENTER, and then use UP / DOWN keys to adjust the value. 3.6.8.5 Alarm In This item allows users to enable/ disable alarm input detection.
DVR User’s Manual 4. Basic Operation The DVR allows users to access some general operations through the front panel easily. The following sections introduce the general operations of the unit. 4.1 View Live / Playback Video The general functions in live and playback mode are described in the following sections. 4.1.1 Viewing Modes The DVR provides users versatile ways of viewing both live and recorded video. Following presents these view formats.
DVR User’s Manual 4.1.2 Digital Zoom Users are able to view a 2× full screen in live mode. To view the 2× full screen, follow the steps. • Press any CHANNEL key to view the corresponding camera in full screen. • Press ENTER to view 2× zoomed screen of the selected camera. • To view a specific area in 2× zoomed screen, use Direction keys to pan / tilt the zoomed screen. • Either press ENTER again or ESC to leave the Zoom mode. 4.1.
DVR User’s Manual The general operations in playback mode are described as follows. Key Usage in Playback The key usage is slightly different in playback mode. Following is the key usage found in playback mode. z LEFT (Reverse Playback): The key is used to reverse the recorded video while the unit is playing back. Press the key repeatedly to increase the speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×. z RIGHT (Forward Playback): The key is used to play the recorded video fast forward.
DVR User’s Manual 4.2 Sequence This section introduces the way to view sequence mode with both Main Monitor and Call Monitor, if connected. Sequence function can avoid manual backtracking and provides more flexibility while monitoring surveillance. 4.2.1 Sequence with Main Monitor Automatic sequence function can be observed in any view mode. Select certain view format and press SEQ to toggle the automatic sequence; press ESC to stop sequencing.
DVR User’s Manual 4.3 Search Recorded Video The DVR is capable of searching and playing back recorded video by time or by events. To search by time, select a specific date and time of the wanted video. To search by event, select channels to display the event list. In live or playback mode, press SEARCH to enter the Search menu, shown as below.
DVR User’s Manual 4.3.2 Calendar Search Follow the steps below to search recorded video via Calendar Search. • Press SEARCH button to enter the Search menu. • Move the cursor to and press ENTER. A calendar will be shown as below.
DVR User’s Manual 4.3.3 Search by Event “Event List” allows users to search wanted video by event. The Event List is displayed as below figure: Event List First Page Date 2011/03/17 2011/03/17 2011/03/16 2011/03/15 2011/03/12 2011/03/12 2011/03/11 2011/03/10 2011/03/08 2011/03/08 2011/03/08 Time 11:26:50 09:53:03 16:14:42 03:45:31 22:27:56 10:09:29 12:18:20 05:16:00 17:11:37 16:29:10 03:22:17 Ch.
DVR User’s Manual 4.4 Video Export The following sections will show how to export video through the OSD setup menu and through the hot keys on the front panel, respectively. Note that the system log will keep records of all video exportations, including duration, start time, and end time. 4.4.1 Export from OSD Setup Menu The Video Export menu enables only the accounts with proper authority to export recorded video with digital signature to a USB storage device or a DVD+RW drive.
DVR User’s Manual 4.4.1.1 Select the External Device The available external devices for exporting video will be listed by name and free size in Select Device menu. The Select Device menu displays as follows. Select Device Device Name xxx-xxx-x-x-xx xx-xxx-xx-xxxx Available 256 MB 1.5 GB Sel No No The DVR only supports EXT3 file system. If an external HDD will be connected to the unit, ensure the format of the HDD is EXT3. Device Name The item shows the name of the available device.
DVR User’s Manual Data Type The item is used to select exporting video type. The options are (export normal video only), (export event video only) and (export both normal and event video). Export Format This item is for selecting exporting video format. The options are , , and . The DRV and AVI files are compressed video files while the original files are raw data of the unit’s recorded video.
DVR User’s Manual 4.4.2 Quick Video Export through Front Panel Through front panel control, the DVR allows users to easily export wanted video as *.drv file with the built-in DVD+RW or to an external device, such as a USB ThumbDrive, and the exported video will be saved as *.drv file. If the video is to be exported to an external device, make sure the device is connected to the DVR unit and the port has been set appropriately for video export.
DVR User’s Manual 4.4.2 Export Normal Video To Export normal video to external device, follow these step: • Press SEARCH and play wanted normal video by entering date and time. Note if the screen is showing in multiple channel mode, please make sure there is no window displaying in Live mode, or the export will not work. • After entering playback mode, play the video and press COPY once to mark the starting point of the export video. The playback continues.
DVR User’s Manual • If there is no any exportable device connected to the DVR unit, a warning message will be shown on the screen • Press ENTER to start the export the whole event video to the connected device; or, press ESC to abort. 4.5 Dome Control The DVR allows users to control a dome camera by the front panel. In Live mode, users can press CHANNEL key to display the desired dome camera in full screen. To enter Dome Control mode, press the DOME key.
DVR User’s Manual 4.5.3 RS485 Setup The DVR controls the domes via RS-485 communication protocol. The RS-485 parameters in the DVR must be set to the same parameters set in dome camera. Users are allowed to change the RS-485 settings of the DVR. Select in Main menu, then select from the System Setup menu and press ENTER. The following menu is displayed. RS485 Setup Unit ID Baud Rate Bits Stop Parity 224 9600 8 1 None The ID number must match the ID address set by the dome.
DVR User’s Manual Focus Far Click on it to focus the lens of selected dome camera at a farther point. Focus Near Click on it to focus the lens of selected dome camera at a nearer point. Zoom Out Click on it to zoom out the lens of selected dome camera. This function enables users to shrink the current image and a larger viewing area can be displayed. Zoom In Click on it to zoom in the lens of selected dome camera. This function enables users to enlarge a certain area.
DVR User’s Manual 4.5.5 Set Preset Points The DVR allows users to set preset positions. The amount of preset points depends on the dome manufacturer. Follow the steps to set preset points. • Press a Channel key to view the corresponding camera in full-screen. • Then press DOME to enter Dome Control mode. The dome control panel will be displayed. • Use Direction keys to pan/tilt the dome camera to desired position.
DVR User’s Manual 4.5.7 Run Dome Camera Tour Users can also display dome camera tour setup at the dome camera side. Follow the steps to run display of dome camera tour. • Press a Channel key to view the corresponding camera in full-screen. • Then press DOME to enter Dome Control mode. The dome control panel will be displayed. • Click on the dome control panel or press CH1 key to access the Set/Go Preset function. A numeral keyboard will be displayed.
DVR User’s Manual 5. Remote Monitoring Software The remote monitoring software is a remote browser-based software application designed to operate with the DVR products. Using the software, users are allowed to view live and recorded video, and configure the DVRs remotely via a LAN, WAN or Internet on a personal computer. The connected PC will automatically download the remote monitoring software plug-ins from the DVR when the DVR is connected by entering its IP address in the address bar on the browser.
DVR User’s Manual 5.2 Installation of Software Refer to the following description to install the remote monitoring software. 5.2.1 Change Internet Settings The PC operating with the remote monitoring software should be set to accept ActiveX plug-ins. Please follow the steps to set the Internet security settings appropriately. • Before operating the remote monitoring software, please check the IP address of the DVR.
DVR User’s Manual • Uncheck “Require server verification (https:) for all sites in this zone”. Type the IP address of the unit in field and click to add this web site to the zone. • Click to confirm the setting and close Trusted sites dialog. • In the Security Level area, click . The Security Settings screen is displayed. • Under , set all items to or . • Click to apply the setting and close the screen.
DVR User’s Manual 5.2.2 Install the Remote Monitoring Software Start the browser to initiate the installation of the remote monitoring software on the PC. The IP address of the DVR can be saved as a Favorites item in the web browser to enable easy access in the future. • Start the IE; it can be started either by clicking on the desktop icon, or by using the Start menu to access it. • Enter the IP address of the DVR in the address bar at the top of the browser.
DVR User’s Manual 5.2.2.1 Login / Logout Login using the same accounts setup in the DVR. The authority is also the same as setup in the DVR. One preset account “admin” and up to two other accounts can access a DVR at the same time. Nevertheless, if the “admin” account is currently accessing the unit’s OSD setup menu via front panel of the unit, then the “admin” account at the remote monitoring site cannot change the settings at the same time. The “admin” account of the DVR has priority.
DVR User’s Manual 5.2.2.2 Software Upgrades If a new version of the remote monitoring software is available on the DVR, upgrade will be prompted while accessing the unit. Follow the steps to upgrade the software. • The message as the above figure will be prompted. Click to accept version upgrade. • Start the IE again and enter the IP address of the DVR in the Address bar of the browser; or if the unit address is set as a Favorite site, click the Favorites entry for the unit.
DVR User’s Manual 5.3.1.1 Select Display Mode Choose the number of windows to be displayed on the main window. Click one of the display buttons in MODE section. Available selections are 4, 9 and 16 camera displays. To view certain window in full screen, either double-click on the wanted window, or click on the corresponding CAMERA button. 5.3.1.2 Operate Cameras with Dome Control The remote monitoring software allows users to control and configure a dome camera remotely.
DVR User’s Manual Focus +/− Use these buttons to adjust the camera lens to focus on objects for a clear view. Click on to focus near or to focus far. Iris +/− This item is used to open and close the iris to let more or less light into the camera. Click on to open iris or to close iris. Zoom +/− Users are allowed to zoom-in or zoom-out using the adjusting buttons. Zoom-in to enlarge a certain area and zoom-out to view more area.
DVR User’s Manual 5.3.3 Playback Video The remote monitoring software allows users to view recorded video either from the DVR, or from the hard disk drive of the PC To access the Playback screen, click button on the main window toolbar. There are three tabs in the Playback screen: , , and tabs. allows users to play back from the DVR. enables users to playback a recorded video file stored on the hard disk drive of the PC.
DVR User’s Manual • The other option in
DVR User’s Manual 5.3.4 Verify Digital Signature The digital signature aims to authenticate a video file exported from the unit. Follow the description to verify the digital signature. • Click on the main window toolbar. • Click tab to display the Verify window. • Click to select the *.gpg, *.avi, *.sig files respectively, which belong to the exported video to be authenticated. • Click to start verifying digital signature.
DVR User’s Manual 5.3.6 Take a Snapshot Snapshot is a simple screen capture tool. When users click on the SNAPSHOT button, it will capture the screenshot of the window that is currently showing on the screen. Each click captures one screenshot to be saved as a JPEG file on the desktop. The snapshot file will be named as “Snapshot-*”. 5.3.7 Health Status This function verifies the HDD status of the DVR. The information items in the status chart are described as below.
DVR User’s Manual 5.3.8 Remote Monitoring Software Troubleshooting What happened if the server requests to upgrade the software every time the DVR is connected? If the following screen displays repeatedly, please follow the steps to delete the temporary internet files. • Select from the main menu of the web browser, then , and then click the tab. • Click the button in the field; the screen displays as below.
DVR User’s Manual Appendix A: Recommended HDDs Refer to the following list for some recommended HDDs to be used in the DVR. Brand Seagate HITACHI Maxtor Model Name Model Number Size Pipeline HD.2 ST3500312CS 500G Barracuda ES.2 ST3500320NS 500G Barracuda 7200.11 ST3500320AS 500G Barracuda 7200.12 ST3500418AS 500G Barracuda 7200.11 ST3750330AS 750G Barracuda 7200.12 ST3750528AS 750G Barracuda 7200.11 ST31000340AS 1000G Barracuda 7200.12 ST31000528AS 1000G Barracuda 7200.
DVR User’s Manual Appendix B: Remote Controller The operational function keys on the remote control are listed as below figure: 64
DVR User’s Manual The keys of the remote control function as the keys of the front panel of the DVR. The only difference between the remote control and the front panel keys is the “DVR SEL” key. The DVR Selection key is used to switch control between each DVR. The remote control can be used to control up to 16 DVRs. To setup the remote control, the first thing is to assign a unique DVR Unit ID to each DVR.
DVR User’s Manual Appendix C: Setup a DVR behind a Router This appendix describes how to set up a router if the DVR connects to the internet via a router. To properly operate a web server, e.g. a DVR, users have to set up both the IP and port of the DVR, which are essential for data and command transmission. The port setting is adjustable in OSD setup menu of the DVR and only one port is needed to do remote operation.
DVR User’s Manual Following is an example of how the router should be set. Router (D-Link DI-724P+) WAN IP: 218.160.54.13 LAN IP: 192.168.0.1 PC IP: 192.168.0.100 DVR 1 IP: 192.168.0.167 Trigger port: 80 DVR 2 IP: 192.168.0.200 Trigger port: 81 • To change the setting of the router, a PC with web browser is required. • Connect to D-Link DI-724P+ from PC via IE. The setup screen will be shown after entering the correct username and password.
DVR User’s Manual A. Select to set up the service. B. Enter the name of the setting in the Name field: DVR 1. C. Enter Private IP: 167 D. Choose as the Protocol Type. E. Enter Private Port: 80. F. Enter Public Port: 80. G. Click for the Schedule setting. H. Click . • Click to go on when the following screen displays. • Follow the steps to set up web port forward to DVR 2. A. Click to set up the service. B.
