User`s manual

User’s Manual
73
2. Press <ENTER> to confirm the selection. Consequently, the screen will
display the instructions to reset after the mask is cleared.
3. Select <RESET> under the CLEAR MASK item and press <ENTER> to
proceed with resetting.
• MASK DISPLAY
This item is used to set the time to display a privacy mask.
FIRST
If this mode is selected, the camera will detect the mask zone at the next
preset position and display the mask in advance, and then pan the Dome
Camera to the preset point.
LAST
If this mode is selected, the camera will move to the preset point first, and
then display the mask zone.
• EXIT
Exit the PRIVACY MASK menu and go back to the MAIN PAGE 3 to carry
on setup of time related setting.
P/M Model:
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
ALARM DETECT OFF
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES