User`s manual

User’s Manual
72
• SET MASK
After pressing <ENTER> to enter the sub-menu of SET MASK, the Dome
Camera will memorize the present position as a privacy mask position; up
to 8 masks can be set. The model restricts the mask zones to be set too
close with each other.
NOTE: For P and M models, the available area for setting a privacy
mask is restricted within tilt angle 45°, and two mask zones are
allowed to set in a view area.
H CENTER (000~255)
The original center of a mask zone is the center of a screen. Users can
move the center of a mask zone to another position by pressing the
LEFT/RIGHT keys on the keyboard to adjust the value.
V CENTER (000~255)
The original center of mask zone is the center of screen. User can move the
center of mask zone to another position by pressing the LEFT/RIGHT keys
on the keyboard to adjust the value.
H SIZE (000~127)
Users can adjust the horizontal size of a privacy mask through this item. Set
the H and V size to 0 can also delete the selected mask.
V SIZE (000~127)
User can adjust the vertical size of a privacy mask through this item. Set the
H and V size to 0 can also delete the selected mask.
NOTE: A mask’s size should be limited within the screen, whatever
the optical zoom is.
• CLEAR MASK
Users can delete a preset mask zone with this item. Please follow the steps
listed below.
1. Select the mask zone that will be erased (e.g. 01).
MASK01 MENU
H CENTER 000
V CENTER 000
H SIZE 000
V SIZE 000
EXIT
+
SAVE
YES