User`s manual

User’s Manual
67
P/M Model:
• ON
The camera will automatically execute motion detection within the
monitoring area.
NOTE: For P and M models, when Alarm Detect is turned on, the
following functions will be affected: 1) AE becomes AUTO mode; 2)
IR becomes ON/OFF mode; 3) Privacy Mask is turned OFF; 4) Digital
Zoom is turned OFF; 5) No Auto Focus; 6) Digital Slow Shutter won’t
work. Additionally, when Alarm Detect function is on, if the Dome
Camera is controlled to execute motions (ex. Tilt and Pan) or
functions (Preset, Sequence and Auto-pan), Alarm Detect will be
disabled temporarily during that time. The function will be resumed in
3 to 5 seconds after all motions stop. Nevertheless, if the dwell time
between preset positions of a Sequence line is set more than 5
seconds, Alarm Detect function will be activated after 5 seconds and
will be turned off temporarily again when the camera starts to go to
the next preset position.
• OFF
The item is used to disable Alarm Detect function.
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
ALARM DETECT OFF
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES