User`s manual

User’s Manual
66
LEFT LIMIT
Move the frame right/left using the right/left keys on the keyboard.
TOP LIMIT
Shift the frame up/down using the right/left keys on the keyboard.
H/V SIZE
Adjust the frame size via changing H/V size value using the right/left keys on
the keyboard.
MODE
Assign a trigger action for a motion detection frame. Options include
PRESET, SEQUENCE, AUTOPAN and CRUISE. When motion is detected
within a frame, the Dome Camera will execute the specific trigger action.
DWELL TIME
The DWELL TIME is duration of executing a trigger action. If select the
PRESET mode, when motion is detected, the Dome Camera will go to the
selected Preset position and stay there for a user-defined period of time
(1~127 seconds/Always). If select other modes (SEQUENCE/AUTOPAN
/CRUISE), the Dome Camera will keep executing the selected mode
(DWELL TIME: ALWAYS) until it is interrupted by commands sent from a
connected control device.
EXIT
Exit the FRAME setting page and go back to ALARM DETECT main page.
• FRAME DISABLE
Select a frame to be canceled, and press “ENTER.” The selected frame will
then be removed from the monitored field.
• THRESHOLD
The Threshold range is adjustable from 1~255. The smaller the value, the
more sensitive it is; i.e. 1: highest sensitivity; 255: lowest sensitivity.
• EXIT
Exit the ALARM DETECT menu and go back to the MAIN PAGE 3 to carry
on setup of WDR function (see 3.3.20 WDR FUNCTION).