User`s manual

User’s Manual

3.3.19 ALARM DETECT

When the alarm detect function is activated, the camera will detect movement

within a monitoring area and then send an alarm signal automatically. There will

be a flash warning notice: MOTION displayed in the upper left corner of the

screen.

G/V/T/S3/S4/S5/S6 Model:

• DETECT SWITCH

The item is used to enable or disable the ALARM DETECT function.

• DETECT MODE

Four alarm detect modes are only provided in G/V/T models for different

application.

INT FOCUS (Internal Focus)

The alarm will be triggered if the internal focus changes; if the focus returns

to the original position, the alarm will stop.

FIX FOCUS

If focus movement is detected, the alarm will be triggered, and the alarm

stops when focus returns to the original position. If the detected focus

movement keeps changing for more than four seconds, the new focus

position will be memorized as the reference, and the alarm will stop.

NOTE: The INT FOCUS and FIX FOCUS detect modes will be

activated only with the Auto Focus mode.

INT AE (Internal AE)

When Auto Exposure (AE) movement is detected, the alarm will be

triggered; if the Exposure Level returns to the original level, the alarm will

stop.

FIX AE

ALARM DETECT

DETECT SWITCH OFF

DETECT MODE NONE

BLOCK MODE NONE

FRAME SET NONE

FRAME DISABLE NONE

THRESHOLD NONE

EXITD YES