User`s manual

User’s Manual
63
• DWELL TIME
The DWELL TIME is duration of executing an alarm action. If the PRESET
mode is selected, the Dome Camera will go to the selected preset position
and stay there for a user-defined period of time (1~127seconds/Always)
when alarm takes place. If other modes (SEQUENCE/AUTOPAN/ CRUISE)
have been selected, the camera will keep executing the selected mode
(DWELL TIME: ALWAYS) until alarm condition is released or users rotate
the joystick to change the status of the Dome Camera.
NOTE: The dwell time is only adjustable when selecting Preset as
the alarm action. When the dwell time is up, the Dome Camera will
go back to its trigger position and recheck alarm pin status.
• EXIT
Exit the ALARM SETTING menu and go back to the MAIN PAGE 3 to carry
on setup of Alarm Detect (G/V/T/P/M models only).
G/V/T/P/M Model:
If use S3/S4/S5/S6 models, after exiting the ALARM SETTING menu, go
back to the MAIN PAGE 3 to carry on setup of Privacy Mask function. Thus
please skip the next section and go to 3.3.21 PRIVACY MASK
to continue
setup of Privacy Mask function.
S3/S4/S5/S6 Model:
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
ALARM DETECT NONE
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING ENTER
ALARM DETECT OFF
WDR FUNCTION OFF
PRIVACY MASK ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD YES